NEA WALL BASE 50

€0,00
By KAIA

Taxes and shipping calculated at checkout.

20% DISCOUNT ON PURCHASE OF 4+

This product is made to order and will be shipped within 1-2 weeks of purchase.

NEA WALL BASE 50 - BRUSHED BRASS is backordered and will ship as soon as it is back in stock.

’LINE OF LIGHT‘

LIGHT IN ITS PUREST FORM, THIS MODERN BRASS WALL LIGHT MAKES THE TECHNICAL INTRICACIES INVISIBLE BY REDUCING THE DESIGN INTO A MINIMALIST LIGHT FIXTURE. NEA's DESIGN CONSISTS OF 500 MM GLASS TUBE CONTAINING A DIMMABLE LED WHICH IS MOUNTED ONTO THE WALL AT A SINGLE POINT USING HAND-CRAFTED BRASS PLATE FIXTURES AND A MOUNTING BOX.

LAMP INCLUDED.
IP44 on request.

DESIGNED BY Peter Straka
HANDMADE BY KAIA

Need a replacement lamp?

DOWNLOADS

PRODUCT SPECIFICATIONS

Dimensions:

500 mm x 75 mm x 82 mm (19.68 in x 2.95 in x 3.23 in )

Weight:

0.6 kg (1.3 lb)

MATERIALS & FINISHES

NEA WALL BASE 50 is made from Solid brass and available in the following finishes:

039 03 101 - Polished nickel
039 03 201 - Brushed nickel
039 03 202 - Brushed brass
039 03 209 - Black matte
039 03 402 - Aged brass
039 03 208 - Bronze / Patinated brass

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation, ensure the relevant mains supply has been safely isolated/disconnected.

Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections. The Mains power must only be switched on once the fitting has been electrically connected to the driver.

1. Make sure to have sufficiently large room (30 mm x 7 mm) for the screws and wiring on the backside of the plate
2. A. Pull the wiring through the centre hole.
B. Connect the unit to the mains.
3. Affix the plate to the wall/ceiling with 2 screws (hole size max. 4 mm).
4. Gently push the socket into the lamp holder.

Mainly suitable for installation onto plaster
walls and joinery. If no plaster wall and joinery is available, a frame can be added.

For further information, please contact sales@kaialighting.com.

CARE INSTRUCTIONS & PATINATION