INNER GLOW CHANDELIER

By KAIA

INNER GLOW is a limited-edition designer chandelier that juxtaposes the classic blown glass and brass typical of KAIA chandeliers with a more organic material: paper.

Produced in Puglia, the paper selected is an evolution of the papier-mâché process and has a raw, textural quality to it that resembles stone. The rough and organic paper is in contrast with the smooth and transparent glass eggs and the rigorous and geometric lines of the brass structure. The way the paper appears to grow over the glass eggs brings to mind the way moss and fungi occasionally grow over walls and buildings.

There is a precarious and somewhat imperfect balance in Sophie Dries chandelier between organic and geometric, natural and artificial, suggesting the possibility of harmonious coexistence.

PRODUCT SPECIFICATIONS

Dimensions:

250 mm x 1400 mm x 600 mm (9.84 in x 55.11 in x 23.62 in)

Weight:

12 kg (26.45 lb)

MATERIALS & FINISHES

INNER GLOW CHANDELIER is made from Solid brass and available in the following finishes:

200 01 202 - Brushed brass
200 01 207 - Oiled & waxed brass

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation ensure the relevant mains supply has been safely isolated/disconnected . Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections. The Mains power must only be switched on once the fitting has been electrically connected.

1. All three ceiling roses must be installed at the same time.
2. The cables only come out of one stem. The others can simply be screwed on.
3. Please turn the upper screw until it is tight! Do not turn the lighting fixture itself
4. Adjust the adjustable screws to the glass ball opening. There has to be a minimum of 1 mm distance between the metal and the glass.
5. Screw in all bulbs, then switch on the circuit and test if the bulbs are functioning. With transportation the lamp holders might get interfered and the bulb will not connect correctly. In this case please disconnect the lighting fixture from the circuit, bend the contact brackets slightly to ensure that the bulbs and the lamp holder are connected.
6. Carefully secure the glass sphere.
7. Carefully fix loosely with the supplied knurled-head screw by hand. Do not use a screw-driver. Do not screw too tightly, ensure there is at least 1 mm tolerance between the glass and the screw.

CARE INSTRUCTIONS & PATINATION