ONA 100 CHANDELIER

Dimensions:

1070 mm (42.12 in)

Weight:

9 kg (19.8 lb)

ONA 100 CHANDELIER is made from solid brass and available in the following finishes:

Brushed brass

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

Before commencing installation, ensure the relevant mains supply has been safely isolated/disconnected.

Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

1. Fix the base plate to the mounting surface using 4 No. 4mm screws. Ensure the fixing points can support the weight of the fixture. Connect the unit to the mains. Please refer to Dimmer Unit installation manual if you connect the fitting to the dimming system.
(ONA 70 only) Place the heat shrink tubes over the wires and heat them up with a lighter after aligning them.
2. Suspend the wire by passing through the clutch to the required length.
3. Lastly, fix the top plate.

LAMP INSTALLATION
- Before commencing installation, ensure the relevant mains supply has been switched off.
- Use supplied fabric gloves to prevent any stains on the surface of the lamp.
- Due to the risk of glass fracture, handle the lamp with care!
- Whilst applying pressure, push the socket into the lamp holder into the marked place. Remove the lamp from the lamp holder carefully with both hands.

KAIA Care Instruction and Patination