MEA WALL PLATE 30

FOR BTOB CUSTOMERS - PLEASE NOTE LAMPS ARE NOT INCLUDED. PLEASE SELECT YOUR OPTION FROM THE LAMPS CATEGORY, UNDER 'SHOP'.   This product is made to order and will be shipped within 4-6 weeks of purchase.
By KAIA

‘Line of light‘

MEA is a modern brass wall light that embodies aesthetic minimalism. A 300 mm tube of glass is anchored to the wall by brass fixtures at each end, with a brass back plate that mirrors the soft glow of the light. This is the linear lamp as an aesthetic object.

Designed by Peter Straka
Handmade by KAIA

Need a replacement lamp?

DOWNLOADS

PRODUCT SPECIFICATIONS

Dimensions:

345 mm x 75 mm x 82 mm x 2 mm (13.58 in x 2.95 in x 3.22 in x 0.07 in)

Weight:

0.6 kg (1.3 lb)

MATERIALS & FINISHES

MEA WALL PLATE 30 is made from Solid brass and available in the following finishes:

040 07 101 - Polished nickel
040 07 201 - Brushed nickel
040 07 202 - Brushed brass
040 07 402 - Aged brass
040 07 208 - Bronze / Patinated brass
040 07 209 - Black matte

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation, ensure the relevant mains supply has been safely isolated/disconnected.

Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

1. Make sure to have sufficiently large room (30 mm x 7 mm) for the screws and wiring on the backside of the plate
2. A. Pull the wiring through the centre hole.
B. Connect the units to the mains.
C. Ensure that both Earth Wires are connected.
3. Affix the plate to the wall/ceiling with 2 screws (hole size max. 4 mm).
4. Gently push the socket into the lamp holder.

Mainly suitable for installation onto plaster walls and joinery. If no plaster wall and joinery is available, a frame can be added.

For further information, please contact sales@kaialighting.com.

CARE INSTRUCTIONS & PATINATION