NEA WALL PLATE 30

€0,00
Taxes and shipping calculated at checkout.
By KAIA

20% DISCOUNT ON PURCHASE OF 4+

This product is made to order and will be shipped within 1-2 weeks of purchase.

’LINE OF LIGHT‘

LIGHT IN ITS PUREST FORM, THIS SMALL BRASS WALL LIGHT MAKES THE TECHNICAL INTRICACIES INVISIBLE BY REDUCING IT TO A SIMPLE FIXTURE. NEA CONSIST OF A 300 MM GLASS TUBE CONTAINING A DIMMABLE LED IS MOUNTED ONTO THE WALL AT A SINGLE POINT USING HAND-CRAFTED BRASS PLATE FIXTURES.

LAMP INCLUDED.

DESIGNED BY Peter Straka
HANDMADE BY KAIA

Need a replacement lamp?

DOWNLOADS

PRODUCT SPECIFICATIONS

Dimensions:

300 mm x 75 mm x 85 mm (11.81 in x 2.95 in x 3.23 in)

Weight:

0.4 kg (0.8 lb)

MATERIALS & FINISHES

NEA WALL PLATE 30 is made from Solid brass and available in the following finishes:

039 04 101 - Polished nickel
039 04 201 - Brushed nickel
039 04 202 - Brushed brass
039 04 209 - Black matte
039 04 402 - Aged brass
039 04 208 - Bronze / Patinated brass

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation, ensure the
relevant mains supply has been safely isolated/disconnected.

Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

The Mains power must only be switched on once the fitting has been electrically connected to the driver.

1. Make sure to have sufficiently large room (30 mm x 7 mm) for the screws and wiring on the backside of the plate
2. A. Pull the wiring through the centre hole.
B. Connect the unit to the mains.
3. Affix the plate to the wall/ceiling with 2 screws (hole size max. 4 mm).
4. Gently push the socket into the lamp holder.

Mainly suitable for installation onto plaster walls and joinery. If no plaster wall and joinery is available, a frame can be added.

For further information, please contact sales@kaialighting.com.

CARE INSTRUCTIONS & PATINATION