ORA 6 CHANDELIER

By KAIA

Hand-blown by master craftspeople, each of the six glass spheres in ORA modern chandelier 6 is connected by an expansive network of solid brass stems and rings. The result is an impactful centrepiece that snakes across the ceiling like a constellation of stars lighting up the room. Its rigorously designed brass network fuses form and function, allowing the piece to be reworked into endless compositions to suit the aesthetic of a space.

Designed by Peter Straka
Handmade by KAIA

Need a replacement lamp?

DOWNLOADS

PRODUCT SPECIFICATIONS

Dimensions:

1430 mm x 725 mm x 480 mm (56.29 in x 28.54 in x 18.9 in)

Weight:

12 kg (26.45 lb)

MATERIALS & FINISHES

ORA 6 CHANDELIER is made from Solid brass and available in the following finishes:

160 02 207 - Oiled brass and waxed
160 02 201 - Brushed nickel
160 02 209 - Black matte
160 02 402 - Aged brass
160 02 208 - Bonze / Patinated brass

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation, ensure the relevant mains supply has been safely isolated/disconnected.

Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections. The Mains power must only be switched on once the fitting has been electrically connected to the driver.

Please note the chandelier has a rigid structure - the ring connectors are NOT adjustable!

1. Mount the glass balls, starting from the inside to the outside.
2. Adjust the adjustable screws to the glass ball opening. There has to be a minimum of 1 mm distance between the metal and the glass.
3. Screw in all bulbs, then switch on the circuit and test if the bulbs are functioning.
With transportation, the lamp holders might get interfered, and the bulb will not connect correctly. In this case, please disconnect the lighting fixture from the circuit, and bend the contact brackets slightly to ensure that the bulbs and the lamp holder are connected.
4. Carefully secure the glass sphere.
5. Carefully fix loosely with the supplied knurled-head screw by hand.
Do not use a screwdriver. Do not screw too tightly, and ensure there is at least 1 mm tolerance between the glass and the screw.

CARE INSTRUCTIONS & PATINATION