GOLDEN FLEECE CHANDELIER

This product is made to order and will be shipped within 12-16 weeks of purchase.
By KAIA

Inspired by Greek mythology, the Golden Fleece is a striking modern LED chandelier that fuses hand-crafted brass and the latest LED technology in rigorous architectural form.

This statement lighting object pushes the boundaries of brass manufacturing, using simple yet refined raw brass elements to create an architectural interwoven structure.

Designed by Markus Benesch Creates
Handmade by KAIA

DOWNLOADS:

PRODUCT SPECIFICATIONS

Dimensions:

70 mm x 1520 mm x 950 mm (2.75 in x 59.84 in x 37.4 in)

Weight:

15 kg (33.06 lb)

MATERIALS & FINISHES

GOLDEN FLEECE CHANDELIER is made from Solid brass and available in the following finishes:

190 01 202 - Brushed brass

This product can be offered with dim to warm technology on request. Please contact sales@kaialighting.com

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation ensure the relevant mains supply has been safely isolated/disconnected. Installation shall be carried out by a qualified electrician only. Ensure all electrical connections are tight with no loose strands. The mains power must only be switched on once the fitting has been electrically connected to the driver.

Before installation it needs to be guaranteed that the existing ceiling/wall construction is suitable for the weight (15 kg) of the instal- led chandelier. The installation MUST be carried out by at least two people to avoid twisting the luminaire unit!

1. Unscrew the main body from the threaded mounting block and mount on the ceiling.
2. Secure the threaded mounting block in place with the screw provided.
3. Slip the heat shrink tubing over the wire. Then pass the wire rope firmly into the main body until it locks in place.
4. Screw wire rope into the rope fixing.
5. Feed the cable through the heat shrink tube and close it over the wire, the wire end and the cable.
Connect the unit to the mains. Please refer to Dimmer Unit installation manual if you connect the fitting to the dimming system.

ATTENTION | Make sure that the lamp is hung straight and evenly. Ideally pulling all 4 wires simultaneously.
Under no circumstances should the suspension cables be loaded individually! The luminaire may only be suspended using all four cables.
The maximum distance from the linear led of the Golden Fleece to the PSU is 3 meters.

For any longer distance please contact sales@kaialighting.com.

CARE INSTRUCTIONS & PATINATION