ETU PENDANT

Dimensions:

350 mm (13.87 in)

Weight:

6 kg (13.78 lb)

ETU PENDANT is made from Solid brass and available in the following finishes:

170 01 201 - Brushed nickel
170 01 207 - Oiled and waxed brass
170 01 209 - Black matte
170 01 208 - Bronze / Patinated brass

Clear crystal glass as standard, smokey grey and ocean blue glass available on request.

If you require a different length or finish, please contact sales@kaialighting.com

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

Before commencing installation ensure the relevant mains supply has been safely isolated/disconnected . Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

1. Fix the ground plate with screws to the ceiling.
2. Screw into the bulb.
3. Carefully secure the metal cone into the glass sphere.
4. Fix loosely all the supplied screws by hand into position. Do not use a screwdriver.
5. Put the stem through the ceiling rose.
6. Thread the cables through the ball joint and screw
the stem into the ball joint. After that connect the
cable with the clamp on the ground plate.
7. Lastly fix the ceiling rose with the knurled screw.

KAIA Care Instruction and Patination